Product Description
Attractive Price 18MPa 3.4kg hydraulic Tilt Cylinder for Forklift
In forklifts, the tilt cylinder is a hydraulic cylinder responsible for tilting the mast and forks of the forklift. It allows the operator to adjust the angle of the divisions to accommodate different load-handling needs. Here are some key points about the tilt cylinder in a forklift:
Function: The tilt cylinder controls the tilting movement of the mast and forks. It lets the operator tilt the forks CHINAMFG or backward to pick up, transport, and deposit loads. The forklift operator can ensure proper load stability, precise positioning, and safe material handling by adjusting the tilt angle.
Hydraulic Power: The tilt cylinder is powered by hydraulic fluid under pressure. It is connected to the forklift’s hydraulic system, which consists of a hydraulic pump, control valves, hoses, and a reservoir. When the operator activates the tilt control lever, hydraulic fluid is directed to the tilt cylinder, causing it to extend or retract and initiate the tilt movement.
| bore diameter (D) | rod diameter (d) | stroke (S) | Installation distance (L) | working pressure | Interface dimensions (M) | weight |
| Φ60 | Φ30 | 32 | 109 | 18MPa | 2-M14*1.5 | 3.4kg |
(1) Our company can customize non-standard oil cylinders within the range of cylinder diameter D360MM and stroke L6000MM according to customer requirements;
(2) The above product prices are nontax unit prices, excluding packaging and transportation costs required for export
Application
Application of Forklift series Tilt Cylinder
1. Load Handling: The primary application of the tilt cylinder is to facilitate the handling of loads. By adjusting the tilt angle of the mast and forks, the tilt cylinder allows the forklift operator to pick up, transport, and deposit loads with precision. It enables the operator to tilt the forks CHINAMFG to engage and lift the load or tilt them backward to stabilize and deposit the load.
2. Load Stabilization: The tilt cylinder plays a crucial role in load stabilization. When lifting and transporting loads, especially those unbalanced or unevenly distributed, the tilt cylinder allows the operator to adjust the tilt angle to prevent load shifting or toppling. This ensures load stability and reduces the risk of accidents or damage to the load and surrounding structures.
3. Accessing and Depositing Loads: The tilt cylinder enables the forklift operator to access and deposit loads in various locations. It allows the forks to tilt CHINAMFG or backward, making it easier to position them under pallets or other load types. Adjusting the tilt angle allows the operator to align the forks with the load and safely deposit it CHINAMFG racks, shelves, or other storage areas.
4. Load Manipulation: The tilt cylinder allows load manipulation and fine control during material handling operations. By incrementally adjusting the tilt angle, the operator can tilt the forks slightly to level the load on uneven surfaces or adjust the load position for better visibility and maneuverability. This enables efficient handling of delicate or fragile loads, optimizing safety and productivity.
5. Pallet Stacking: The tilt cylinder is widely used in pallet stacking applications. It enables the operator to tilt the forks backward to create a slight incline, allowing for easy entry and retrieval of pallets from stacked loads. The tilt cylinder also assists in aligning the divisions with the pallets during stacking, ensuring accurate placement and stability of the stacked pallets.
6. Customized Load Handling: The tilt cylinder in a forklift series can be used for customized load-handling applications. Some forklift models feature additional attachments or accessories, such as side shifters or clamp arms, which can be controlled by the tilt cylinder. This allows forklift operators to adapt the tilt angle and manipulate loads with specialized requirements, such as gripping or rotating materials.
Importance of Forklift Tilt Cylinder
Load Stability: The tilt cylinder allows the operator to adjust the tilt angle of the mast and forks, ensuring load stability during material handling operations. By tilting the forks CHINAMFG or backward, the operator can secure the load and prevent it from shifting or falling off them. This enhances safety and minimizes the risk of accidents or damage to the bag.
Precise Load Positioning: The tilt cylinder enables precise load positioning, allowing the operator to align the forks with the load and accurately deposit it CHINAMFG racks, shelves, or other storage areas. Adjusting the tilt angle allows the operator to achieve optimal load placement, which is critical in tight or confined spaces where maneuverability is limited.
Versatility: The tilt cylinder provides versatility in load-handling applications. The forklift can handle various load sizes and shapes by adjusting the tilt angle to accommodate different load requirements. This versatility enhances the adaptability of the forklift in multiple industries and warehouses, where different types of goods and materials must be handled.
Improved Operator Visibility: Adjusting the tilt angle can improve the operator’s visibility during material handling operations. By tilting the forks backward, the operator can have a better line of sight over the load, increasing situational awareness and reducing the risk of accidents caused by limited visibility.
In summary, the tilt cylinder in a forklift is of utmost importance as it ensures load stability, enables precise load positioning, enhances versatility, improves operator visibility and ergonomics, facilitates efficient pallet stacking, and allows customization and attachment compatibility. These factors contribute to safer, more efficient, and more productive material handling operations in warehouses, distribution centers, manufacturing facilities, and other industrial settings.
Our Company
We have a first-class independent R&D platform for assembly. The forklift cylinder production workshop has 4 semi-automatic lifting cylinder assembly lines and 1 fully automatic tilting cylinder assembly line, with a designed annual production capacity of 1 million pieces; the special cylinder workshop is equipped with semi-automatic cleaning and assembly systems of various specifications, with a designed annual production capacity of 200,000 essays. It has famous CNC machining equipment, machining centers, special equipment for high-precision cylinder processing, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and automatic paint production lines. We have more than 300 sets of critical equipment running. The optimized allocation and efficient utilization of equipment resources ensure the precision requirements of the products and meet the high standard quality requirements of the products.
|
Forklift cylinder assembly shop |
Other types of cylinder assembly shop |
Welding
Painting & coating
|
Painting & coating line |
Fully automatic water-based |
Testing
To further improve product performance, and establish the leadership position of our hydraulic cylinder in the industry, our company and zjimee jointly established a Comprehensive performance laboratory of hydraulic cylinders, hydraulic valves, and hydraulic pumps; the lab is computer-assisted testing, using electro-hydraulic control technology, the test conditions preset by computer, which improves the test accuracy and system versatility, and the experimental data.
The automatic collection is realized through the application of sensors, and the output data, such as the internal leakage and load efficiency of the cylinder or the valve, are directly processed by the
computer and converted to standard units (ml/min; %). At the same time, to ensure the working safety of the hydraulic system, the state monitoring function is carried out for key performance parameters, such as “oil temperature monitoring, liquid level monitoring, filter device monitoring,” etc. Among them, the hydraulic cylinder test stand can test the performance of “load efficiency” and “internal leakage” by readings. At the same time, it is equipped with a grating ruler measuring instrument, which meets the requirements of all test items of hydraulic cylinder products in the national standard
Our Factory
Packaging & Shipping
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | GS, RoHS, CE, ISO9001 |
|---|---|
| Pressure: | Medium Pressure |
| Work Temperature: | Normal Temperature |
| Acting Way: | Double Acting |
| Working Method: | Rotary |
| Adjusted Form: | Regulated Type |
How do rotary cylinders manage variations in load capacity and weight?
Rotary cylinders are designed to effectively manage variations in load capacity and weight in different applications. Here’s a detailed explanation:
1. Size and Configuration: Rotary cylinders come in various sizes and configurations to accommodate a wide range of load capacities and weights. Larger cylinders with larger piston areas can handle greater loads, while smaller cylinders are suitable for lighter loads. The selection of the appropriate cylinder size and configuration is crucial to match the specific load requirements.
2. Pressure and Force: Rotary cylinders utilize fluid pressure to generate the necessary force for rotation. By adjusting the pressure within the cylinder, the force output can be regulated to match the variations in load capacity and weight. Higher pressure is applied for heavier loads, while lower pressure is sufficient for lighter loads.
3. Load Balancing: In applications where there are variations in load capacity or weight distribution, multiple rotary cylinders can be used to balance the load. By distributing the load across multiple cylinders, the individual load capacity of each cylinder is reduced, ensuring that no single cylinder is overloaded.
4. Positioning and Center of Gravity: Proper positioning of the load and consideration of the center of gravity are important when managing variations in weight. Ensuring that the load is balanced and properly supported helps distribute the weight evenly and reduces strain on the rotary cylinder.
5. Safety Factors: When dealing with variations in load capacity and weight, it is essential to incorporate safety factors into the design and selection of rotary cylinders. Safety factors account for uncertainties and unexpected variations in the load, ensuring that the cylinder can handle occasional peak loads or weight fluctuations without compromising safety and performance.
6. Manufacturer Guidelines: Manufacturers provide load charts, technical specifications, and guidelines for their rotary cylinders. These resources outline the load capacities and weight limits for different cylinder sizes and configurations. It is crucial to consult these guidelines to ensure that the selected rotary cylinder is suitable for the specific load requirements.
7. Regular Maintenance and Inspection: Regular maintenance and inspection of rotary cylinders are necessary to ensure their continued performance and safe operation. This includes checking for any signs of wear, leaks, or damage that may affect the cylinder’s load-bearing capacity. Timely maintenance and replacement of worn components help manage variations in load capacity and weight effectively.
By considering these factors and following manufacturer recommendations, rotary cylinders can effectively manage variations in load capacity and weight in a wide range of applications.
Can rotary cylinders be applied in both mobile and stationary machinery?
Yes, rotary cylinders can be applied in both mobile and stationary machinery. Here’s a detailed explanation:
1. Mobile Machinery: Rotary cylinders find extensive use in mobile machinery, such as construction equipment, agricultural machinery, material handling equipment, and transportation vehicles. In these applications, rotary cylinders enable controlled rotational motion for various functions, including steering, lifting, tilting, opening and closing attachments, and actuating hydraulic brakes. The compact design and versatility of rotary cylinders make them well-suited for mobile machinery, where space and weight considerations are crucial.
2. Stationary Machinery: Rotary cylinders are also widely utilized in stationary machinery across various industries. They play a crucial role in applications such as industrial automation, manufacturing processes, packaging equipment, robotics, and machine tools. In stationary machinery, rotary cylinders provide controlled rotation for tasks such as part positioning, indexing, clamping, cutting, and material handling. The precise and repeatable rotational motion offered by rotary cylinders contributes to the overall efficiency and productivity of stationary machinery.
3. Versatile Mounting Options: Rotary cylinders come with versatile mounting options, allowing them to be easily integrated into different types of machinery, whether mobile or stationary. They can be mounted in various orientations and configurations to suit specific application requirements. This flexibility in mounting ensures that rotary cylinders can be effectively applied in diverse machinery designs.
4. Customization: Manufacturers offer a wide range of rotary cylinder models with different sizes, load capacities, and performance characteristics. This allows users to select the most suitable cylinder for their specific mobile or stationary machinery application. Additionally, rotary cylinders can be customized to meet specific requirements, such as stroke length, rotational speed, and mounting interfaces, further enhancing their applicability in both mobile and stationary contexts.
5. Environmental Considerations: Rotary cylinders are designed and engineered to withstand various environmental conditions encountered in both mobile and stationary machinery. They are constructed using durable materials that can withstand factors such as vibration, shock, temperature variations, and exposure to dust, moisture, or corrosive substances. This ensures reliable performance and longevity, regardless of whether the machinery is mobile or stationary.
6. Integration with Control Systems: Rotary cylinders can be seamlessly integrated into control systems, such as hydraulic or pneumatic control circuits, electronic control units (ECUs), or programmable logic controllers (PLCs). This integration allows for precise control and coordination of the rotary motion with other machine functions, enabling efficient operation and automation in both mobile and stationary machinery.
Overall, the adaptability, versatility, and performance characteristics of rotary cylinders make them suitable for application in a wide range of machinery, whether it is mobile or stationary, contributing to enhanced functionality and efficiency in various industries.
What industries commonly use rotary cylinders in their equipment?
Rotary cylinders find applications in various industries where rotational motion is required. Here’s a detailed explanation:
Industries:
1. Manufacturing and Automation: Rotary cylinders are extensively used in manufacturing and automation industries. They are employed in machinery and equipment for tasks such as part rotation, indexing, material handling, and robotic arm movement.
2. Packaging: The packaging industry utilizes rotary cylinders in packaging machinery for tasks such as container rotation, labeling, sealing, and filling processes.
3. Automotive: In the automotive industry, rotary cylinders are utilized in assembly lines, robotic welding, painting systems, and automated material handling systems.
4. Aerospace and Defense: Rotary cylinders are employed in aerospace and defense applications for tasks such as actuating control surfaces, robotic arm movement, precision machining, and testing equipment.
5. Food and Beverage: The food and beverage industry uses rotary cylinders in equipment for tasks such as product sorting, packaging, labeling, and filling processes.
6. Material Handling and Logistics: Rotary cylinders are used in material handling and logistics equipment, including conveyor systems, lifts, cranes, and automated storage and retrieval systems.
7. Printing and Paper: The printing and paper industry utilizes rotary cylinders in printing presses, paper handling systems, cutting and folding machines, and other equipment requiring precise rotation and movement.
8. Textile and Apparel: Rotary cylinders are employed in textile and apparel machinery for tasks such as fabric winding, dyeing, printing, cutting, and sewing operations.
9. Energy and Utilities: The energy and utilities sector uses rotary cylinders in equipment such as turbines, valves, actuators, and control systems for power generation, water treatment, and oil and gas processing.
10. Medical and Pharmaceutical: Rotary cylinders find applications in medical and pharmaceutical equipment for tasks such as precision positioning, robotic surgery, packaging, and laboratory automation.
These are just a few examples, and rotary cylinders can be found in numerous other industries and applications where rotational or swinging motion is required.
It’s important to consult industry-specific guidelines and requirements for the proper selection, integration, and maintenance of rotary cylinders in equipment.
editor by CX 2024-04-15