Product Description
Wholesale Customized hydraulic press cylinder Lift cylinder for Cart
Oil Lift cylinders, also known as hydraulic lift cylinders, utilize hydraulic fluid (usually oil) to generate force for lifting or lowering applications.
| bore diameter (D) | rod diameter (d) | stroke (S) | Installation distance (L) | working pressure | Interface dimensions (M) | weight |
| Φ40 | Φ35 | 120 | 233 | 25MPa | M12*1.5 | 3.6kg |
(1) Our company can customize non-standard oil cylinders within the range of cylinder diameter D360MM and stroke L6000MM according to customer requirements;
(2) The above product prices are nontax unit prices, excluding packaging and transportation costs required for the export
How do Oil Lift cylinders work?
-
Components: An Oil Lift cylinder consists of several parts, including a cylinder barrel, piston, piston rod, seals, hydraulic connections, and control valves. The cylinder barrel is a hollow tube that houses the piston, which divides the cylinder into 2 chambers.
-
Hydraulic System: The Oil Lift cylinder is part of a hydraulic system that includes a hydraulic pump, reservoir, and control valves. The hydraulic pump pressurizes the hydraulic fluid, which is stored in the reservoir. The control valves regulate the flow and direction of the hydraulic fluid to the cylinder.
-
Lifting Operation: When the hydraulic pump is activated, it directs pressurized hydraulic fluid into 1 side of the Oil Lift cylinder (typically the bottom chamber). The high-pressure fluid pushes against the piston, causing it to move upward.
-
Lifting Force: As the piston moves upward, it exerts a force on the piston rod connected to the load or lifting mechanism. This force lifts the bag vertically.
-
Lowering Operation: To lower the load, the control valves are adjusted to release or redirect the flow of hydraulic fluid from the cylinder back to the reservoir. This allows the weight of the load or external forces (such as gravity) to push the piston downward, lowering the load.
-
Sealing Mechanism: Seals are installed in the cylinder to prevent hydraulic fluid leakage and maintain the pressure within the cylinder. The seals ensure efficient operation and avoid contamination of the hydraulic system.
-
Control and Safety: The control valves in the hydraulic system regulate the flow and pressure of the hydraulic fluid to the Oil Lift cylinder. Safety features such as pressure relief valves or overload protection mechanisms may be incorporated to prevent excessive pressures or overloading.
Do I know any specific maintenance requirements for Oil Lift cylinders?
-
Regular Inspection: Conduct routine visual inspections of the cylinder, piston rod, seals, and hydraulic connections. Look for signs of leakage, damage, or wear. Inspect the seals for any signs of deterioration or leakage. If any issues are detected, address them promptly.
-
Fluid Maintenance: Monitor the condition and level of the hydraulic fluid regularly. Check for contamination, such as dirt, debris, or water, affecting the cylinder’s performance. Follow the manufacturer’s guidelines for fluid type, recommended viscosity, and change intervals.
-
Seal Maintenance: The seals in the Oil Lift cylinder play a crucial role in preventing fluid leakage. Keep the seals clean and ensure they are in good condition. If there are signs of wear or leakage, replace the seals per the manufacturer’s recommendations.
-
Lubrication: Some Oil Lift cylinders may require specific lubrication for the seals, piston rod, or other moving parts. Follow the manufacturer’s lubrication frequency, type, and application method guidelines.
-
Control System Maintenance: If your Oil Lift cylinder is part of a more extensive hydraulic system with control valves, ensure that the control system is in proper working order. Check the valves for proper operation, leaks, or blockages. Clean or replace any clogged filters or screens.
-
Safety Checks: Regularly inspect any safety features or mechanisms associated with the Oil Lift cylinder, such as pressure relief valves or overload protection systems. Verify that these safety components are functioning correctly and provide the necessary protection.
-
Manufacturer Xihu (West Lake) Dis.lines: Adhere to the manufacturer’s maintenance instructions and guidelines for your Oil Lift cylinder. These guidelines may include recommended maintenance schedules, torque specifications, and other important information.
-
Professional Servicing: If you encounter complex issues or require in-depth maintenance, consult a qualified hydraulic technician or the manufacturer’s service department for assistance. They can provide guidance troubleshooting support, and perform repairs or maintenance tasks as needed.
Our Company
We have a first-class independent R&D platform for assembly. The forklift cylinder production workshop has 4 semi-automatic lifting cylinder assembly lines and 1 fully automatic tilting cylinder assembly line, with a designed annual production capacity of 1 million pieces; the special cylinder workshop is equipped with semi-automatic cleaning and assembly systems of various specifications, with a designed annual production capacity of 200,000 essays. It has famous CNC machining equipment, machining centers, special equipment for high-precision cylinder processing, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and automatic paint production lines. We have more than 300 sets of critical equipment running. The optimized allocation and efficient utilization of equipment resources ensure the precision requirements of the products and meet the high standard quality requirements of the products.
|
Forklift cylinder assembly shop |
Other types of cylinder assembly shop |
Welding
Painting & coating
|
Painting & coating line |
Fully automatic water-based |
Testing
To further improve product performance, and establish the leadership position of our hydraulic cylinder in the industry, our company and zjimee jointly established a Comprehensive performance laboratory of hydraulic cylinders, hydraulic valves, and hydraulic pumps; the lab is computer-assisted testing, using electro-hydraulic control technology, the test conditions preset by computer, which improves the test accuracy and system versatility, and the experimental data.
The automatic collection is realized through the application of sensors, and the output data, such as the internal leakage and load efficiency of the cylinder or the valve, are directly processed by the computer and converted to standard units (ml/min; %). At the same time, to ensure the working safety of the hydraulic system, the state monitoring function is carried out for key performance parameters, such as “oil temperature monitoring, liquid level monitoring, filter device monitoring,” etc. Among them, the hydraulic cylinder test stand can test the performance of “load efficiency” and “internal leakage” by readings. At the same time, it is equipped with a grating ruler measuring instrument, which meets the requirements of all test items of hydraulic cylinder products in the national standard.
Our Factory
Packaging & Shipping
A short lifting cylinder for a forklift is a specific type of hydraulic cylinder designed for vertical lifting applications in forklifts. It is typically used to raise and lower the mast assembly and forks of the forklift, allowing for the lifting and positioning of loads. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | GS, RoHS, CE, ISO9001 |
|---|---|
| Pressure: | Medium Pressure |
| Work Temperature: | Normal Temperature |
| Acting Way: | Double Acting |
| Working Method: | Rotary |
| Adjusted Form: | Regulated Type |
How do rotary cylinders manage variations in hydraulic pressure and flow rate?
Rotary cylinders are designed to effectively manage variations in hydraulic pressure and flow rate. Here’s a detailed explanation:
1. Pressure Regulation: Rotary cylinders incorporate various mechanisms to manage variations in hydraulic pressure. These mechanisms include pressure relief valves, pressure control valves, and flow control valves. Pressure relief valves are designed to protect the cylinder and the hydraulic system from excessive pressure by diverting excess fluid flow back to the reservoir. Pressure control valves, such as pressure reducing valves or pressure sequence valves, are used to regulate the pressure applied to the rotary cylinder. These valves ensure that the cylinder operates within the desired pressure range, accommodating variations in the hydraulic system.
2. Flow Control: Rotary cylinders also utilize flow control mechanisms to manage variations in hydraulic flow rate. Flow control valves, such as flow restrictors or flow control regulators, are employed to control the amount of fluid flowing into or out of the cylinder. By adjusting the opening of these valves, the flow rate can be regulated, allowing for precise control of the cylinder’s rotational speed or angular displacement. Flow control valves help manage variations in flow rate and optimize the cylinder’s performance.
3. Proportional Control: Proportional control valves are often used in conjunction with rotary cylinders to manage variations in pressure and flow rate. These valves provide continuous and precise control over the hydraulic pressure and flow by adjusting the valve opening proportionally to the input signal. Proportional control allows for real-time adjustments in response to changing operational requirements, ensuring accurate and efficient management of pressure and flow variations.
4. Feedback Devices: Rotary cylinders can incorporate feedback devices, such as pressure sensors and flow sensors, to monitor and provide feedback on the hydraulic pressure and flow rate. These sensors provide real-time information about the operating conditions, allowing for dynamic adjustments to maintain desired pressure and flow levels. Feedback devices help ensure the stability and consistency of the cylinder’s performance, even in the presence of variations in hydraulic pressure and flow rate.
5. Accumulators: In some cases, rotary cylinders can utilize hydraulic accumulators to manage variations in pressure and flow rate. Accumulators store hydraulic energy in the form of pressurized fluid, which can be released when needed to compensate for fluctuations in pressure or flow. By providing an additional source of energy, accumulators help maintain consistent pressure and flow, preventing adverse effects caused by sudden changes in hydraulic conditions.
6. System Design and Optimization: Proper system design and optimization play a crucial role in managing variations in hydraulic pressure and flow rate. This includes selecting appropriate components, sizing the hydraulic lines, and ensuring proper fluid filtration and conditioning. By designing the hydraulic system to match the requirements of the rotary cylinder and the application, variations in pressure and flow rate can be effectively managed, resulting in optimal performance.
By employing these strategies and mechanisms, rotary cylinders can effectively manage variations in hydraulic pressure and flow rate, ensuring reliable and consistent performance in a wide range of applications.
What benefits do rotary cylinders offer in terms of efficient rotary motion?
Rotary cylinders offer several benefits in terms of efficient rotary motion. Here’s a detailed explanation:
1. Compact Design: Rotary cylinders have a compact design, allowing them to be easily integrated into machinery and equipment with limited space. Their compact size ensures efficient utilization of available workspace.
2. High Torque Output: Rotary cylinders are capable of generating high torque output, making them suitable for applications that require powerful rotational force. This enables efficient operation even in heavy-duty tasks.
3. Precise Control: Rotary cylinders provide precise control over rotary motion. By adjusting the fluid pressure or flow rate, the rotational speed and position of the cylinder can be accurately controlled, allowing for precise positioning and smooth operation.
4. Quick Response Time: Rotary cylinders offer quick response times, enabling rapid and dynamic rotary motion. They can start, stop, and change direction swiftly, making them ideal for applications that require fast and precise rotary movements.
5. Versatile Mounting Options: Rotary cylinders come with versatile mounting options, allowing them to be easily mounted in different orientations to suit specific application requirements. This flexibility in mounting facilitates efficient integration into various machinery and equipment designs.
6. Energy Efficiency: Rotary cylinders are designed to be energy-efficient. They consume power only during movement, reducing energy consumption and operating costs. Additionally, the compact design of rotary cylinders minimizes friction losses, further enhancing energy efficiency.
7. Durability and Longevity: Rotary cylinders are built to be durable and withstand demanding operating conditions. They are constructed with high-quality materials and undergo rigorous testing to ensure long service life and reliable performance.
8. Wide Range of Sizes and Configurations: Rotary cylinders are available in a wide range of sizes and configurations to accommodate different application requirements. This versatility allows for efficient selection and customization based on specific load capacities, space constraints, and performance needs.
9. Compatibility with Different Fluids: Rotary cylinders are compatible with various hydraulic or pneumatic fluids, providing flexibility in choosing the most suitable fluid for the application. This compatibility ensures efficient operation and reliable performance.
10. Reduction in Manual Labor: By automating rotary motion, rotary cylinders eliminate the need for manual labor in tasks such as rotating or positioning objects. This reduces human effort, increases productivity, and minimizes the risk of repetitive strain injuries.
Overall, the efficient rotary motion provided by rotary cylinders contributes to improved productivity, enhanced control, energy efficiency, and reliable performance in a wide range of industrial applications.
How do rotary cylinders handle variations in rotation and positioning?
Rotary cylinders are designed to handle variations in rotation and positioning with precision and control. Here’s a detailed explanation:
Rotation Variations:
1. Actuation Method: Rotary cylinders use different actuation methods, such as hydraulic or pneumatic pressure, to generate rotational motion. By varying the pressure or flow rate of the fluid, the speed and torque of the rotation can be adjusted to meet specific requirements.
2. Control Valves: Control valves are used to regulate the fluid flow into and out of the rotary cylinder. By adjusting the valve settings, the rotational speed and direction can be controlled, allowing for variations in rotation as needed.
3. Feedback Systems: Some rotary cylinders incorporate feedback systems, such as position sensors or encoders, to provide real-time information about the cylinder’s rotational position. This feedback enables precise control and the ability to handle variations in rotation accurately.
Positioning Variations:
1. Stroke Adjustment: Rotary cylinders often have adjustable stroke lengths, which allow for variations in the positioning of the rotary motion. By adjusting the stroke, the range of the rotary movement can be customized to suit the specific application.
2. Positioning Guides: Rotary cylinders may feature positioning guides, such as grooves or slots, that help guide and stabilize the rotational movement. These guides ensure accurate positioning and minimize deviations or wobbling during operation.
3. Limit Switches: Limit switches or proximity sensors are sometimes used in rotary cylinders to define specific positions or limit the rotary motion within a predetermined range. These switches provide feedback to the control system, enabling precise positioning control.
4. Precision Manufacturing: Rotary cylinders are manufactured with high precision to ensure smooth and accurate rotation. The use of high-quality materials, precision machining, and tight tolerances contribute to minimizing variations in rotation and positioning.
Overall, the combination of actuation methods, control valves, feedback systems, stroke adjustment, positioning guides, limit switches, and precision manufacturing allows rotary cylinders to handle variations in rotation and positioning with the required level of accuracy and control.
It’s important to refer to the manufacturer’s specifications and guidelines for specific information on the capabilities and limitations of rotary cylinders in handling rotation and positioning variations.
editor by CX 2024-03-30